seeger SAC12000S Manual Del Usario página 13

Cooling
Select the "Cool" position to reduce the temperature:
Press the MODE button until the "Cool" indicator comes on.
Press the up/down button to select the temperature displayed on the screen (16°C
and 32°C)
Press the SPEED button until the desired ventilation speed is turned on.
To adjust the direction of airflow horizontally, manually adjust the ai flap.
To adjust the direction of airflow horizontally, please press the SWING button.
Note: The air conditioner automatically turns off when the ambient temperature is below
the selected temperature.
Ventilation
Press the MODE button until the "Fan" indicator turns on.
In ventilation mode, the ambient air is changed and not cooled.
Press the SPEED button to select the desired speed level.
Drying/Dehumidification
Press the MODE button on the control panel, the dry light will light up. Unable to select
fan speed. The user must connect the pipe to the drain at the bottom of the device. In
this mode, the fan speed is set to low and cannot be adjusted.
Sleep mode (this function can only be selected by the remote control).
The sleep mode can be activated in cooling mode.
After 1 hour, the preset temperature is increased by 1 ° C, after another hour by 1 ° C
again, etc.
After an hour, the preset temperature is reduced by 1 ° C, then again by 1 ° C after
another hour. Then the temperature remains constant for 10 hours. The screen is
dimmed. The fan speed is set to the lowest level for quiet operation and is not
adjustable.
13
ENG