Filling The Rinse Aid Dispenser - Klarstein HAVASIA UV 6 Manual De Instrucciones

EN
44

FILLING THE RINSE AID DISPENSER

The rinse aid is released during the last rinse cycle and prevents the water from forming
drops on the dishes, which can leave stains and streaks. It also improves drying by
making the water roll off the dishes. This dishwasher is designed for the use of liquid rinse
aids.
Note: Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser
with other substances such as dishwasher detergent or liquid detergent. This would
damage the device.
Refilling the rinse aid dispenser
If the rinse aid warning light (
amount by looking at the colour of the visual level indicator next to the lid. When the
rinse aid tank is full, the display is completely dark. The size of the dark spot decreases
as the amount of rinse aid decreases. The rinse aid level should never be less than 1/4.
When the amount of rinse aid decreases, the size of the black dot on the rinse aid level
indicator changes as shown below.
Full 3/4 full
To top up the rinse aid
1
Remove the lid of the rinse aid dispenser
by turning it anticlockwise.
) on the control panel is not lit, you can estimate the
1/2 full 1/4 full
Carefully fill the rinse aid into the
dispenser, making sure that it does not
overflow.
Empty
2