Set Up And Installation - Abask M18 Manual Del Usuario

Set up and Installation

1.Use the suction cup mount to install the M18 dash cam
on the windshield, recommended place near the rear view
mirror facing front, adjust the lens angle for best coverage.
2.Plug the included power adapter Into the car cigarette
lighter socket, the indicator will light up meaning power is
on.
3.Connect the power cable to the camera. For better
looking, route the excess cable alongside the Interior trim
as the diagram shows.
4.Install the rear view camera on the rear windscreen (inside
the car), adjust the lens angle for best coverage, then
connect the rear camera connector to the main unit.
5. After installation, please start the engine, and do a bench
test to make sure all function works well.
4