Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7. Security considerations
Warning! Please read all instructions carefully. Failure to comply with them is likely to result in elec-
tric shock, fire or other serious injury! peration of the shears. When installing or dismantling shears,
be sure to cut off the power first.
WORKPLACE SAFETY INSTRUCTIONS
1.
Keep the workplace clean and bright, chaotic and dark workplace may cause accidents.
2.
Do not operate electric pruning shears in explosive, flammable and humid environments.
3.
Let the children and bystander leave before operating the electric pruning shears normally, so as to
avoid accidental injury caused by distractions during the operation.
ELECTRICAL SAFETY INSTRUCTIONS
1.
The battery jack of the power tool must match the battery connection end, and do not modify the
socket and plug in any way.
2.
Power tool should not be exposed to rain or damp conditions. Water or other liquids entering it will
increase the risk of electric shock and electrical damage.
3.
Do not abuse the wire, do not use the wire to lift, pull the power tool or pull its plug, keep the power tool
away from heat, oil, sharp edges or moving parts, and do not use the charger when the wire or plug is
damaged, dam aged or winding wire will increase the risk of electric shock.
PERSONAL SAFETY INSTRUCTIONS
1.
Be alert, pay attention to the operation of the power tool and stay awake when operating, do not operate
under tired, medication or alcohol reaction, distrac tion during operation can lead to serious personal injury.
2.
Use safety protection devices, always wear goggles, etc., under appropriate conditions, such as dust masks,
anti-skid safety shoes, safety helmets, hearing protection devices, etc., can reduce personal injury.
3.
Before the power tool is connected, remove all the adjusting keys or wrenches, and the wrenches or
keys left on the power tool rotation part can cause personal injury.
4.
When operating, do not extend your hands too long, keep your hands away from the working area,
never reach under the material for any reason, and ensure that any material or surface below the ope-
rating area will not be damaged. and always pay attention to the foot and body balance, so that you
can control power tool in unexpected circumstances.
5.
Dress appropriately, do not wear loose clothes or accessories, keep your hair, clothes and sleeves
away from moving parts, loose clothes, accessories or long hair may be drawn into moving parts.
22
Tabla de contenido
