Nexo Rose 202 2SH Manual página 87

3 > ASSEMBLE AND DISASSEMBLE
(1) Assemble
Insert the E-type handpiece in the motor insert until hear the sound of spring insert to the groove. (Fig.1)
Fig 1.
Before each treatment check by pulling if contra angle or straight handpiece
(2) Disassemble
Fig 2.
Simply pull out the handpiece from the motor. (Fig.2)
Do not fit or remove the contra angle or straight handpiece during rotation,to prevent the handpiece.
4 > UNLOAD THE BUR
4,1 Straight handpiece:
(1) When inserting the bur, rotate bur lock ring to the bottom position in the direction of the white arrow and pull out the test bur (shown
as fig. 3),open the bur lock and take the test bur out of the straight handpiece.
87