Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Operation:
The unit is switched on and off on the main switch
above the static bar connectors.
The operational status is generally shown on the ON/
OFF green switch. However this does not show that the
high voltage is present.
If there is a fault in one or several of the static bars,
the power unit will shut down automatically for safety
reasons – it is current limited to 5mA. It will switch on
again when the excessive load or fault is removed.
Service and maintenance:
The power units requires no maintenance, although
the static eliminators attached, need to be cleaned
regularly.
Check mains supply and fuse on power unit. Replace
fuse if necessary (400mA).
Please note: Kongskilde power units have no user
serviceable parts. The warranty will be void if the
costumer attempts to make repairs.
Technical data:
Powder coated steel case with totally encapsulated
windings.
Dimensions
Please note that the power unit will be IP54 only in
locked position with its proper counterparts.
The possibility of remotely monitoring the mains is
available on request.
3
Tabla de contenido
