Technical Information - Bellman Visit BE1480 Manual Del Usuario

Technical information

Power supply
Battery power
Operating time
Power consumption
Radio function
Radio frequency
RF radio Power
Number of Radio Keys
Coverage
Antenna
Activation
Output signals
Additional information
Weight:
Colour:
Operating temperature:
Transport and storage temtransport: -10°–50° C.
Relative humidity:
9 V battery: Duracell MN1604, Energizer 522
(alkaline) or Ultralife U9VL-J-P (lithium)
Duracell MN1604/Energizer 522:
On the Visit System: approximately 3 years
On the Fire Alarm System: approximately 2 years
Ultralife U9VL-J-P:
On the Visit System: approximately 6 years
On the Fire Alarm System: approximately 4 years
Active: 40 mA
Idle position: < 10 μA
868.3 MHz
Maximum transmission power: 5.6dBm
64 Radio Keys as standard. Special software
can be used to increase these to 256 Radio Keys
in increments of 64 per software purchase.
Contact the nearest supplier for further
information.
The normal coverage between a transmitter
and receiver in the Visit System is
approximately 200 metres with a clear line of
sight. Coverage is reduced if walls and large
objects screen off the signals. Any thick walls
constructed of reinforced concrete will greatly
affect coverage. The system may also be
affected by radio transmitters such as TV
transmitters,computers, mobile phones, etc.
This means that a unit may work perfectly in
one part of the room but not at all in another.
The antenna (2) should be straight and pointed
directly down to achieve best coverage
between Visit Smoke Alarms and receivers
within the Visit System.
Via Test Button (1).
Via the built-in smoke detector.
Via the built-in temperature sensor, if the
temperature exceeds approx. 57°C.
Built-in sound signal: 85 dBA maximum at 3 metres.
For indoor use only
Dimensions Ø x H 100 x 35 mm
With battery: 125 g. Without battery: 75 g
White
0°–35° C, 32°–95° F.
15% – 90% (non condensing).
71
DE
DK
ES
FI
FR
GB
IT
NL
NO
PL
SE
App