EcoFlow 100 W Rigid Solar Panel Manual De Instrucciones página 8

As shown below:
Drain Hole
Ventilation Hole
Mounting Hole
Grounding Hole
Note:
1. The holes at the center of each long edge are used for grounding.
2. Modules should be securely mounted to withstand all expected loads, including wind and snow loads.
3. The gap between modules should be 12.7 mm (0.5 in) or larger.
Each module has two labels that provide the following information:
NameplateSticker: Provides information on the product type, and the electrical parameters, weight, dimensions,
etc., measured under standard test conditions.
SN Code Sticker: Each module has a unique serial number.
Note: Do not remove any labels from the solar panel; removal of any labels voids the product warranty policy
from EcoFlow.
5
Nameplate Sticker
(SN Code Sticker)