Cameo LUXIS FC Manual De Usuario página 16

Refer to the table below for encoder modes.
Rotate encoder = change value, press encoder = confirm and next menu item
Dimmer UC1 User Colour 1 Dimmer
CCT Dimmer
HSI Dimmer
Direct LED Dimmer
Disabled Menu navigation
AUTO STANDALONE MODE
The 6 available auto programs partly comprise non-editable colour change sequences and partly
random scenes. Brightness, running speed and delay (delay for slave units) can be set separately
for each program.
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Stand Alone, confirm with ENTER, then select the submenu item Auto and
confirm again with ENTER.
This will take you to the submenu for setting the submenu items (see table, select with UP and
DOWN, confirm with ENTER, change value with UP and DOWN, confirm with ENTER). The settings
for each programme are made separately and are retained even after restarting the device.
Program Selects programs
Dimmer Sets brightness
Speed Sets running speed
Delay Sets the delay for slave units
16
CCT = Colour Temperature
Hue = colour shade
Strobe Red Green
Tint = tint
Saturation = saturation
Blue Amber Lime
Program 1 – 6
0–100
0–100
0.0 – 2.0s
Cyan