STERWINS EPS2-20.3 Manual De Instrucciones página 260

damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier to
control.
7. Use the power tool, accessories and tool bits etc. In accordance
with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool
for operations different from those intended could result in a hazardous
situation.
8. Keep handles and grasping surfaces dry, clean and free from
oil and grease. Slippery handles and grasping surfaces do not allow for
safe handling and control of the tool in unexpected situations.
Service
1. Have your power tools serviced by a qualified repair person
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Pruner safety warnings
Gerneral
1. Power tool plugs must match the outlet. Power too plugs must
connect to a power outlet specified on the label.
2. Interrupt your work when you feel tired or exhausted. Make regular
breaks to regenerate. A moment of inattention while operating the
product may result in serious personal injury.
3. Keep all parts of the body away from the saw chain. Do not remove cut
material or hold material to be cut when saw chain is moving. Make
sure the switch is off when clearing jammed material. A moment of
inattention while operating the product may result in serious personal
2. SAFETY INSTRUCTIONS
259
EN