EN
12
OPERATION
•
Remove the cover and take out the water tank and fill it with tap water.
Replace the tank and put the cover back on.
•
Check that the nozzle is properly seated on the top of the unit.
•
Connect to a household outlet and use the knob on the front to set the
desired efficiency. Turn the knob counterclockwise as far as it will go to turn
the unit off.
•
When the water tank is empty, the control lamp lights up and the unit does
not continue to operate. Refill with water and briefly switch the unit off and on
again.
•
The humidifier will automatically turn off when you remove the tank cover and
will continue to operate when you replace it.
CLEANING AND MAINTENANCE
•
Turn off the unit and disconnect the power before cleaning.
•
Clean the outer surface with a damp cloth and a little detergent. For the water
tank and any lime deposits on the nozzle, use lukewarm running tap water
with a little detergent.
•
Never use abrasive or scratching materials such as scouring powder or steel
wool.
•
Store the device in a dry place when not in use for a longer period of time.