Carton Contents - sunjoe LJSS100 Manual

Unpacking

Carton Contents

• Support stand axle
• Rear posts (x2)
• Front post
• Beam
• Screw Knobs (x3)
• Bolts (x6)
• Lock nuts (x4)
• Washers (x4)
• Retaining rings (x2)
• Retaining ring pliers
• Manual and registration card
1. Carefully remove the support stand and
check to see that all of the above items are
supplied.
2. Inspect the product carefully to make
sure no breakage or damage occurred
during shipping. If you find damaged or
missing parts, DO NOT return the unit to
the store. Instead, please call the Snow
Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton
and packaging material until you are
ready to use your new support stand. The
packaging is made of recyclable materials.
Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and
packaging material are not toys. Do not
let children play with plastic bags, foils, or
small parts. These items can be swallowed
and pose a suffocation risk!
m
WARNING!
To reduce the risk of
injury, the user must read and understand this
operator's manual before using this product.
Failure to follow all warnings and precautions
may result in personal injury or property damage.
customer service center at
®
Disassemble Log Splitter
Wheels & Front Stand
Log splitter sold separately
Tools required: screwdriver + wrench set
1. To remove the hub cap from the wheels,
push the snap fittings out from the back of
the wheel using a screwdriver (Fig. 1).
Fig. 1
Hub cap
2. Remove the retaining ring from the end
of the log splitter axle using the provided
retaining ring pliers (Fig. 2).
Fig. 2
Retaining
ring pliers
3. Pull the wheels off the log splitter.
4. Detach the front stand of the log splitter by
removing the nuts underneath (Fig. 3).
Fig. 3
Front
Stand
3
Wheel
Retaining ring
Log Splitter
Nut