Flow Diagram - Hansgrohe Metris S 31160000 Modo De Empleo/Instrucciones De Montaje

6
Safety Notes
6 Gloves should be worn during installation to prevent
crushing and cutting injuries.
6 The shower system may only be used for bathing,
hygienic and body cleansing purposes.
6 The hot and cold supplies must be of equal
pressures.
Installation Instructions
• The fitting must be installed, flushed and tested after
the valid norms.
• The mixer can not used together with a continuous
flow water heater.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:
anti-pollution function
4
English
Symbol description
max. 1 MPa
0,25 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31
Maintenance non return valve
(see page 41)
The non return valves must be checked
regularly according to DIN EN 1717 in
accordance with national or regional
regulations (at least once a year).
Adjustment
To adjust the hot water limiter on single lever
mixers, please see page 36.
Do not use silicone containing acetic acid!
Dimensions
(see page 34)

Flow diagram

(see page 35)

Rate of flow mixer

Rate of flow handshower
Spare parts
(see page 38)
Operation
(see page 37)
Cleaning
(see enclosed brochure)
Test certificate
(see page 42)