Presentation - Taramps EQ BASS Manual De Instrucciones

Presentation

EQ BASS - Now you can control 100% of your amplifier remotely, through the EQ BASS.
Volume, Bass Boost, High Pass and Low Pass and a Limiter, turning each song into a truly
customized sound experience.
Front panel functions
1- LEVEL: Adjusts the input sensitivity of the BASS EQ, which allows for a perfect match the
output signal levels of virtually all models of CD/DVD head units on the market. Even 3V input
is possible.
2 - ON: Indicates that the amplifier connected to the MONITOR is on.
3 - CLIP: Indicates that the amplifier connected to the MONITOR is clipping.
4 - PROT: Indicates that the amplifier connected to the MONITOR is in protection mode.
5 - BOOST: Boost for Sub-bass, with a variable amplitude from 0 to +10dB at the frequency
defined in FREQ.
6 - FREQUENCY: Determines the Bass Boost acting frequency from 35Hz to 60Hz.
7 - SUBSONIC FILTER (HPF): Variable adjustment from 8Hz to 30Hz, which determines the
beginning of the amplifier's operating frequency.
8 - LOW PASS FILTER (LPF): Variable adjustment from 60Hz to 250Hz, which determines the
end of the amplifier's operating frequency.
9 - LIMITER: Allows you to adjust the output limiter threshold.
10 - ON: Indicates that EQ BASS is on.
Rear panel functions
1- NEGATIVE POWER TERMINAL: Use the shortest possible 1.5mm² cable, connected to the
negative pole of the battery.
2 - REMOTE TERMINAL: It must be connected to the remote output of the CD/DVD player
using a 0.75mm² (18 AWG) cable.
3 - POSITIVE POWER TERMINAL: Use a 1.5mm² ( 16 AWG) cable straight from the positive
terminal of the battery with fuse or circuit breaker (1A) as close as possible to the battery.
4 - OUTPUT: Audio signal output. It transmits the signal to the amplifier after passing through
the equalizers.
5 - MONITOR: Cable connection (Accessory included) that allows monitoring of theamplifier
via ON, CLIP and PROT.
6 - INPUT: Signal input to be equalized. Connect it to the CD/DVD Player's RCA output,
using a good quality shielded cable to avoid noise pickup.
1 2 3 4 5 6
1 2 3
7 8 9 10
4 5 6
07 01