Safety Instructions - Uniteck UNIFIX 300.1 C Manual De Instrucciones

EN
Dear customer, thank you for purchasing one of our UNITECK products. Please read carefully all the
instructions before using the product.
DESCRIPTION
UNIFIX 300.1 C mounting bracket was designed to fix UNISUN 300.12M photvoltaic panels on a flat surface
(campervan roof, mobile home, peniche...)
Its multi position system with gas springs allows to optimize your panel's performance by choosing the
optimum inclination angle, from 0° to 65°, for a production up to 40% better than a flat setting.
The inclination can be adjusted using two springs positions with stop angles at 45° or 65°.
For a precise adjustment, UNIFIX 300.1 C is delivered with a rope fixing system that allows to keep an
inclination angle between 0° and 65°.
UNIFIX 300.1 C is easy to install, and can be fixed :
- with adhesive sealant directly on your vehicle roof (adhesive not included)
- with bolts (not included)
- on your vehicle roof rack (U-bolts not included)
Its aluminium structure is equipped with a key locking system that allows to secure your installation.
UNIFIX 300.1 C is delivered with stabilizer pads for an optimum fixing even on a not perfectly flat roof.

SAFETY INSTRUCTIONS

• Take the appropriate measures to prevent accidents during your mounting steps.
• If the brackets and the mounting tools are exposed to sunlight for a long period, there is a risk of
getting burnt. Make sure to protect yourself accordingly.
• When finished, and after 72 hours, check and make sure that all of your brackets and panels are fixed
properly
• If you fix by gluing, follow the glue manufacturer's instructions regarding drying time.
• When moving the vehicle, the panel must be in a flat position and the whole structure must be locked.
14
www.uniteck.fr