Rear Panel - Vonyx STM-3007 Manual De Instrucciones

REAR PANEL

1. POWER SUPPLY INPUT JACK
Input voltage from this jack.
2. VOLTAGE SELECTOR
Select voltage which you need.
3. 1/4" OUTPUT JACKS
Connect the mixer to a receiver use cables with 1/4" plugs
4. AMP OUTPUT JACKS
Connect the mixer to an amplifier use cables.
5. ZONE OUTPUT JACKS
Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location.
6. RECORD OUTPUT JACKS
Connect the mixer to a second receiver or amplifier powering speakers in the DJ booth or in a remote location.
7. EFFECTS SEND/RECEIVE JACKS
Permits you to either include externally generated effects (such as a digital sampler) in the mix, or to process the mixed
sound (echo reverb, etc.)
8. LINE INPUTS
Lets you connect most high-level audio source, such as CD players, tape deck, tuner or VCR.
9. INPUT SELECTOR
Set these switches based on what is plugged into Phono/ Line input jacks.
10. MIC JACK
Microphones with a 1/4" connector can be connected to these input terminals.
11. GROUND
Ground Screw for turntables.
6