Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Pull the starter grip until resistance is felt. Continue pulling until the notch on the
starter puller aligns with the hole on the recoil starter
At this point, the intake and exhaust valves are closed and this will help to protect the
engine from internal corrosion.
(1) Align the notch on the starter pulley with the hole at the top of recoil starter.
4. Change engine oil.
5. Cover tiller with plastic sheet.
Do not place the tiller with the handlebars on the ground. It will cause the oil entering
the cylinder or the fuel spillage.
31
Tabla de contenido
