Idiomas disponibles
Idiomas disponibles
Tabla de contenido
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) ISO radio brackets • D) Trim plate
A
The World's best kits.
®
Scion FR-S
Toyota 86
Visit
KIT FEATURES
• DIN radio provision with pocket
• ISO DIN radio provision with pocket
B
C
MetraOnline.com
2013-2016,
Subaru BRZ
2017-2020
MetraOnline.com
for audio/video and steering wheel control interface options.
D
© COPYRIGHT 2022 METRA ELECTRONICS CORPORATION
99-8236
I N S TA L L AT I O N I N S T R U C T I O N S
2013-2015,
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
– DIN radio provision with pocket........................3
– ISO DIN radio provision with pocket .................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1761
Antenna Adapter: 40-LX11
Steering wheel control interface: AXSWC
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
REV. 3/2/22 INST99-8236
Tabla de contenido
Manuales relacionados para Metra 99-8236
Resumen de contenidos para Metra 99-8236
- Página 1 Ensure that all installation connections are secure before cycling the ignition to test this product. NOTE: Refer also to the instructions included with the aftermarket radio. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 3/2/22 INST99-8236...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Using the panel removal tool, carefully unclip and remove the radio trim bezel. (Figure A) 2. Remove (4) 10mm bolts securing the factory radio, disconnect the wiring, and then remove the radio. (Figure B) Continue to Kit Assembly (Figure A) (Figure B) 386.257.1187 MetraOnline.com... -
Página 3: Kit Assembly
6. Locate the factory wiring harness and antenna connections to the radio. Metra recommends connector in the dash and complete all using the proper mating adapter from Metra and/ necessary connections to the radio. Metra or AXXESS. Test the radio for proper operation . - Página 4 Log onto www.installerinstitute.edu or call 386-672-5771 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians The World’s best kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 3/2/22 INST99-8236...
- Página 5 NOTA: Consulte también las instrucciones incluidas con la radio de mercado secundario. The World’s best kits. MetraOnline.com ® © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 3/2/22 INST99-8236...
-
Página 6: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Con la herramienta de extracción del panel, desenganche y retire con cuidado el bisel de la moldura del radio. (Figura A) 2. Retire (4) pernos de 10 mm que sujetan la radio de fábrica, desconecte el cableado y luego retire la radio. -
Página 7: Ensamble Del Kit
Metra recomienda usar el adaptador necesarias a la radio. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra y / o AXXESS. - Página 8 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). The World’s best kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 3/2/22 INST99-8236...