NuWave Brio 8Q Manual Del Proprietário página 18

ADVANCED SETTINGS
Edit while cooking
1. While cooking, press Stage until the function you would like to edit
shows in the LED display.
2. Adjust the cooking temperature and time.
3. If there are more cooking presets that you would like to edit, press Stage
until you reach the preset you would like to edit as described above.
• The Brio will continue cooking with the edits that you have made.
• When the Brio has finished cooking, the Brio will beep 3 times and the
LED display will show "End".
4. To save your edits, press and hold Menu for 1 second and "101" will be
displayed. Select the preset number (101-150) that you would like to
save your edits to and hold Menu again for 1 second.
Note: Once saved, the edited preset will be available for recall. If the cooking
process has finished, the preset is no longer editable.
If you saved a preset to a filled memory slot, the new preset will override the
previous one. Any edits to a preset program (1~100) can only be saved and
stored into program numbers 101~150. You cannot save an adjusted preset
to its original preset number.
Sear
Sear 1 is ONLY available at the beginning of the cooking process. Sear 2 is
ONLY available at the end of the cooking process.
Sear 1 & 2 can be used together to sear your food before and after the
cooking process.
Sear 1
The default temperature and time is 400F for 5 minutes.
1. Adjust your cooking temperature and time.
2. Press Sear to engage the Sear 1 function.
3. Adjust the Sear temperature and time up to a maximum of 400F and
30 minutes.
4. Press START/PAUSE to begin. The Brio will start preheating. Once
preheated, "Sear 1" and ":" will be flashing.
• Once the Sear 1 cycle is finished, the Brio will automatically go into the
regular cooking temperature and time set on step 1.
• When the Brio has finished cooking, it will beep 3 times and the LED
display will show "End".
18
advanced settings