Safety Instructions - Fontastic Casy Instrucciones De Uso

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

GB
Note: When the headsets are placed in the multi-case, the
connection is interrupted. Once both headsets are removed,
they will automatically reconnect to the last paired BT source,
provided it is within range. If the headset units do not connect
automatically or if an existing connection is disconnected,
switch both headsets either by inserting and removing them
from the multi-case, or manually off and on again.
Pairing the multi-case:
The multi-case must be paired with a Bluetooth
be used wirelessly.
1. Switch on the multi-case by pressing and holding the
multifunction button (7) for approx. 2 seconds.
The multi-case automatically enters pairing mode to connect
to a Bluetooth
®
source.
2. Search for „Casy Speaker" on your Bluetooth
and select it from the list of found devices to pair the multi-case
with the Bluetooth
®
device.
Use single headset:
If connected to a BT source, you can use one of the headset units
individually. Place the unused unit back into the multi-case and
close the cover.
Button control headsets
All control commands are performed with the headsets'
multi-function sensor.
Music Start/Stop: Single click on either headset.
Volume-: Double click left headset.
Volume+: Double-click right headset.
Previous track: Triple-click left headset,
Next title: triple-click right headset.
Accept call: Single click on either headset.
End call: Single click on one of the two headsets.
Reject call: Press and hold for 2 seconds on either headset.
Controls for single headset use
Start/Stop/Accept call: Single click.
End call: Double click.
Reject call: Press and hold for 2 seconds.
Key control multi-case
Music start/stop: Press the multi-function button once.
Volume-: Press and hold the volume- button
9
®
enabled device to
®
enabled device
Volume+: Press and hold the Volume+ button
Previous track: Pressing the Volume- button twice
Next track: Press the Volume+ button twice
Accept/end call: Pressing the multifunction button once.
Reject call: Press and hold the multifunction button for 2 seconds.
Note: It rarely happens that the super bass of the headset is
overdriven by settings of the cell phone.
In this case, use the „Normalize" function (also „Adjust
volume") in the audio settings of the smartphone.
LED light
The multi-case is equipped with an LED light. Turn light on and off
by pressing the lamp switch.

Safety instructions

• Do not operate the headset at the highest volume for extended
periods of time.
• Stop using the headset in dangerous situations.
• Do not use both headsets while driving a vehicle.
• Never open the device
• Do not immerse the device in water and protect it from moisture.
• Unplug electronic devices when not in use for an extended period
of time.
• The product is not a toy for children
• The product is not suitable for children because of the high
volume.
• Do not use the device if it has visible damage.
Technical data:
In-ear headset
• BT: 5.3
• Frequency: 2.4GHz
• Driver: 13mm
• Improved bass sound
• Battery capacity: 40mAh
• Operating time: Up to 5 hours (70% volume)
• Charging time: 2 hours
• LED status indicator on headset
• Voice announcement: DE/GB
• Case material: ABS
Multi-case
• BT: 5.3
GB
10
Tabla de contenido
loading

Tabla de contenido