Klarstein MELVILLE 3 Manual De Instrucciones página 66

EN
66
Problem Possible Causes
This may be caused by
Knocking noise in on-site installation or
the water pipes the cross-section of the
piping.
The dishes were not
loaded correctly.
The programme was not
powerful enough.
Not enough detergent
was dispensed.
The dishes are not
Items are blocking the
clean.
movement of the spray
arms.
The filter combination is
not clean or is not cor-
rectly fitted in the base
of wash cabinet.
This may cause the spray
arm jets to get blocked
Combination of soft
water and too much
Cloudiness on
detergent.
glassware.
White spots appear Hard water area can
on dishes and cause limescale deposits.
glasses.
Black or grey marks Aluminium utensils have
on dishes. rubbed against dishes.
Improper loading
Dishes are removed
too soon
The dishes are not
drying
What To Do
This has no influence on the
dishwasher function. If in
doubt, contact a qualified
plumber.
See notes in "Loading &
unloading your dishwasher".
Select a more intensive
programme.
Use more detergent, or
change your detergent.
Rearrange the items so that
the spray
can rotate freely .
Clean and/or fit the filter
correctly Clean the spray arm
jets.
Use less detergent if you
have soft water and select
a shorter cycle to wash the
glassware and to get them
clean.
Add more detergent.
Use a mild abrasive cleaner to
eliminate those marks.
Load the dishwasher as
suggested in the directions.
Do not empty your dishwash-
er immediately after washing.
Open the door slightly so that
the steam can come out. Take
out the dishes until the inside
temperature is safe to touch.
Unload the lower basket first
to prevent the dropping wa-
ter from the upper basket.