Uline H-9726 Manual De Instrucciones página 5

4
1, 2
PAGE 5 OF 15
CHAIR ADJUSTMENTS
5
3
1-800-295-5510
uline.com
1. Seat Height Adjustment – To raise seat height, lift
lever up with little to no weight on the seat. To lower
seat height, lift lever up while sitting.
2. Upright Tilt Lock – To lock chair in an upright position,
push the lever in toward the center of the seat.
To restore tilt, pull lever out. Chair has synchro tilt:
the back tilts at a two-to-one ratio to the seat angle.
3. Tilt Tension – To increase tilt tension, turn knob
clockwise. To decrease tilt tension, turn knob
counterclockwise.
4. Back Height – To raise the back, lift the back until it
clicks into the desired height. To lower the back, lift
the seat back to its tallest height to release ratchet
mechanism. Then, push it down to the lowest height
setting.
5. Armrest Adjustment
a. Height – To adjust armrest height, press the
button on the side of each armrest and move
the armrest up or down.
b. Width – To adjust arm width, turn knob under
seat counterclockwise and move armrest in or
out. Turn knob clockwise to tighten.
0622 IH-9726