Uline H-9726 Manual De Instrucciones página 2

Figure 1
Dust
Cover
Gas Lift
Figure 2
Figure 3
Armrest Bracket
PAGE 2 OF 15
ASSEMBLY
Base
Caster
Mechanism
1. Insert casters into legs on underside of five-star base.
Turn base upright. Insert gas lift into center of base
and place dust cover over gas lift. (See Figure 1)
2. Align mechanism with holes on bottom of seat
cushion. Use four 6 x 24 mm mechanism screws
to secure. (See Figure 2)
NOTE: Use Allen wrench to tighten all screws.
For H-9727, continue to step 3 to attach
armrests. For H-9726, skip to step 5.
3. Align armrest brackets with holes on bottom of seat
cushion. Use four 6 x 24 mm armrest bracket screws
to attach. Repeat on opposite side. (See Figure 3)
NOTE: Arrow on bracket should face outside
of seat.
0622 IH-9726