Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS
Large Push Button Adjustment
‰ Replace the tank lid on the toilet.
‰ Press the large push button to flush the toilet.
‰ If the flush is satisfactory, proceed to "Small Push
Button Adjustment" section.
‰ If toilet does not flush completely, or the water runs
continuously or starts and stops by itself, remove the
tank lid.
‰ Loosen large push button lock nut.
‰ If toilet does not flush completely, unscrew the
large button push button rod slightly to lengthen it.
Replace the tank lid and flush. Repeat adjustment
until the flush is acceptable, tighten the locknut.
‰ If the water runs continuously or starts and stops
by itself, screw in the large button push button rod
slightly to shorten it. Replace the tank lid and flush.
Repeat adjustment until the flush is acceptable,
tighten the locknut.
Small Push Button Adjustment
‰ Press the small push button to flush the toilet.
‰ If toilet does not flush completely, or the water runs
continuously or starts and stops by itself, remove
the tank lid.
‰ Loosen small push button lock nut.
‰ If toilet does not flush completely, unscrew the
small button push button rod slightly to lengthen it.
Replace the tank lid and flush. Repeat adjustment
until the flush is acceptable, tighten the locknut.
‰ If the water runs continuously or starts and stops
by itself, screw in the small button push button rod
slightly to shorten it. Replace the tank lid and flush.
Repeat adjustment until the flush is acceptable,
tighten the locknut.
1506286-2-A
2 of 7
ADJUSTMENT
Locknuts
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Push Button Assembly
Push Button Rods
Tabla de contenido
