Assembly Instructions
4 2
3
B
C
4
2 3
B
M6 x 75 mm Bolt
Small Flat Washer
Small Lock Washer
(4 used in this step)
(4 used in this step)
②
(4 used in this step)
③
④
4. Align and attach the Center Stretcher (C) between the Table Legs (B) by inserting the 75 mm Bolt (2)
with Lock Washer (3) and Flat Washer (4) through each countersunk hole on the legs and securely
screw into the threaded inserts on the Stretcher. Tighten the bolts with the enclosed hex wrench. As
shown.
5