Charging Page; Stop Charging Page; Custom Charging-Single Charging Page; Custom Charging-Single Charging-Quantitative Charging Page - ONEXUS OX1 C Manual Usuario

app operation

CHARGING PAGE

The charging page is the most important page, which mainly displays
information and data during the charging process, such as current,
power, voltage, total power consumption, charging time, charging
station temperature, charging mode, and maximum output current.
If there is "CUSTOM CHARGE" option, the maximum charging time, the
maximum charging power and other information will aslo be displayed.

STOP CHARGING PAGE

There are generally three ways to stop the charge:
1. Manually click the "Stop charging" button through the APP to
stop.
2. It will stop automatically when the charging condition is
reached.
3. It stops when the charging gun was accidentally pulled out.
52
CHARGING STOPS PAGE:
After the charging conditions are reached, the
charging stops. The prompt will be shown to the
user like the above picture. You need to manually
click the "Charging stops" button in the above
picture again to return to the homepage.
When you return to the homepage, the APP
prompts to pull out the gun. If you don't pull out the
gun, there will be a 10-second wait. After 10 seconds,
you can start another charging, and you can also
click the icon and text of pulling out the gun in the
above picture to start another charging.
CUSTOM CHARGING-SINGLE CHARGING
PAGE
There are three parameters that can be set for a custom single charging.
1. Extend the duration: Extend certain duration to start charging from
now on. If 0 is set, it means to start immediately, while other data is
set, it means to have scheduled charging, and the maximum is 24
hours.
2. Charging time: The maximum charging time, after which the charging
station will automatically stop charging. Setting to 0 means that the
charging time is not limited, and the maximum value is 48 hours. The
charging duration parameter and the charging power parameter
can be set at the same time, and one parameter must be selected
at least.
3. Charging power: The maximum charging power, beyond which
the charging station will automatically stop charging. Setting it to 0
means that the charging power is not limited, and the maximum value
is 100 degrees. The charging duration parameter and the charging
power parameter can be set at the same time, and one parameter
must be selected at least.