Better Homes and Gardens BHW-10008 Manual De Instrucciones página 5

⑤ x 12
① x 8
4. Lay one Chair Backrest (A) on a smooth and protected surface with the threaded holes facing up.
5. Attach one Seat Frame (B) to the Chair Backrest (A) with the end dowel fully inserted. Make sure the
will face up when the unit is turned upright. Insert eight 3" Bolts (1) with the Washers (4 and
Seat Board
5) through the drilled holes on the seat frame at rear corner blocks and loosely tighten into the threaded
inserts on the Backrest (A).
6. Secure the Seat Frame (B) to the Chair Backrest (A) by inserting two 1 5/8" (2) with the Washers (4 and
5) through the drilled holes on the rear rail of the Seat Frame.
7. Stand the assembled chair upright on a flat surface. Press down the Seat (B) to even all legs. Now,
tightly fasten all bolts and nuts with the provided hex wrench and open wrench.
8. Repeat the same process to assemble the other chair.
Assembly Instructions
B
A
5
B
2
4
5
② x 4
1
4
5
A
④ x 12