Whalen Huntingdon EC-HU48D Manual De Instrucciones página 7

NOTE: Please do not fully tighten all bolts until you finish assembling all parts. Once assembled, go
back and fully tighten all bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Cabinet Left and Right Sides
(C and D), Right Back Panel (I) and Stretcher (G) with a Phillips screwdriver.
NOTE: Screw-in cam bolts must be screwed down flush.
3
3
3
3
3
3. Glue the Wood Dowels (3) into the drilled holes on the Cabinet Left and Right Sides (C and D),
Cabinet Back Panel (I) and Stretcher (G).
NOTE: It is very important to use a small amount of glue on both ends of dowels.
Assembly Instructions
C
C
3
I
3
3
2
D
D
3
G
3
7
I
3
3
3
G
3