Instructions For Use; Battery Installation - Lomography LOMOGRAFLOK 4X5 Instant Back Manual

instRUCtions foR Use

BattEry installation

The LomoGraflok operates with 4 × AA batteries (4 × 1.5 V).
1. Open the Battery Door [ 6 ] by sliding the Battery Door [ 6 ] outward.
2. Insert 4 × AA fresh batteries according to the indication inside
the Battery Door [ 6 ] .
3. Slide back and close the Battery Door [ 6 ] in place.
Film installation
Use only Fujifilm Instax Wide film with LomoGraflok.
1. Open the Back Door [ 9 ] by lifting the Back Door Lock [ 1 1 ] .
2. Match the yellow mark on the Fujifilm Instax Wide film with the
Yellow Mark [ 1 0 ] inside the Film Chamber and install the film
pack.
3. Close the Back Door [ 9 ] .
4. Switch on the LomoGraflok by switching the On/Off Switch [ 1 ] .
5. Press the Film Ejection Button [ 2 ] to eject the black card of the
film pack.
7