Power Supply Unit - Maytronics Dolphin Nautilus CC Plus w/Wi-Fi Instrucciones De Uso

English

3. Power supply unit

Digital Switch-mode Power Supply
• Input: 100 VAC – 250 VAC
• 50-60 Hz
• 180 W
• Output: <30 VDC
• IP 54
• Bluetooth /Wi-Fi max. trans. power 10 mW EIRR, 2.4 GHz frequency
® ®
Section 2 – Robot pool cleaner Operation
Part 1 – Preparing the Robot Pool Cleaner for Use
Laying out the cable
Unwind minimal required cable to cover the entire pool size, straight the cable along the pool side.
Make sure there are no twists or kinks.
3.5 m
12 ft
Only use the original supplied power supply unit.
The Power supply unit is splash proof – do not immerse it in water.
Unplug the power supply unit before any servicing activity.
Do not plug the power supply unit in before placing the pool cleaner in the water.
Ensure the mains outlet is protected by a ground fault interrupter (GFI) or an earth leakage interrupter (ELI).
Important: Do not enter the swimming pool while the pool cleaner is working.
Swivel
2