Bellman & Symfon BE1411 Manual De Usuario página 95

Testing the signal
Using the test buttons
1 Press both test buttons
simultaneously on the transmitter.
The top LED lights up in green to
show that a radio signal is being
transmitted.
2 The green Visit LED on the
receiver lights up to show that the
signal was received. In addition,
it starts to sound, flash or vibrate
depending on the receiver.
Note: If you have changed the
signal pattern, it will react in
accordance with the tables
on page 191 to 192.
188
1
2
Testing the signal
Using the doorbell or intercom
1 Press the button on the doorbell
or intercom. The LED on the
transmitter lights up in green to
show that the sound is detected.
2 The green Visit LED on the receiver
lights up to show that the radio
signal was received. In addition,
it starts to sound, flash or vibrate
depending on the receiver.
Note: If you have changed the
signal pattern, it will react in
accordance with the tables
on page 191 to 192.
1
2
189
App