Kenmore DS1030 Manual De Uso Y Cuidado página 17

Brush roll is jammed.
Brush roll in the
Brush roll needs to be reset.
motorized nozzle is
not turning.
Brush roll is not installed properly.
Dust cup is full.
Filter needs cleaning.
Vacuum is not
picking up or Filter needs to be replaced.
suction power is
weak.
Battery may be depleted.
Dust cup is not installed well.
Filter is missing or installed
incorrectly.
Dust escapes from Filter is damaged and needs to be
vacuum. replaced.
Dust cup is full or is installed
incorrectly.
Vacuum turns off
Battery may be depleted.
on its own.
TROUBLESHOOTING
Remove obstruction. Follow instructions on page
14.
Turn the unit off and remove the obstruction, then
turn back on.
Remove the brush roll and reinstall as instructed
on page 14.
Empty the dust cup.
Follow filter cleaning instructions on page 12-13.
To purchase parts call 1-877-531-7321 (US) /
1-844-608-3081 (CA).
Charge the battery as instructed on page 9-10.
Check the dust cup for correct installation and
ensure it is snapped firmly in place.
Check the filter for correct installation. See page
12-13.
To purchase a replacement filter, call 1-877-531-
7321 (US) / 1-844-608-3081 (CA).
Empty the dust cup container or position the dust
cup correctly and snap firmly into place.
Charge the battery as instructed on page 9-10.
- 17 -