Important - Kenmore DS1030 Manual De Uso Y Cuidado

EMPTYING DUST CUP AND CLEANING FILTER
2. Press the dust cup release button, lift the
released end first and pivot the dust cup
downwards to detach the unit from the
holding clip at the bottom of the unit.
And then separate the dust cup from the
hand vacuum body.
2
3. Remove the filter basket from the dust
cup. Empty the contents into a waste bin.
NOTE:
The key to maximum
performance is having a clean filter.
Cleaning the filter frequently will help
your vacuum cleaner operate at peak
efficiency. An extra filter is provided with
your vacuum cleaner to allow you to dry
one filter properly while using the other. To
purchase additional parts call 1-877-531-
7321 (US) / 1-844-608-3081 (CA).
4. Remove the filter from the filter
basket. With a soft, dry brush, clean
any accumulated debris from the side
screens of the filter and the filter basket.
1
5. After repeated use, it may be necessary
to wash the filter basket and filter. First
brush loose debris from both basket and
filter, then hand wash basket and filter
in warm water. After washing, set aside
and allow to air dry for 24 hours.

IMPORTANT:

filter must be completely dry before reuse.
6. Insert the clean, dry filter into the
basket and fit the basket into the dust
cup ensuring an air tight seal is formed
around the dust cup opening.
7. Reconnect the dust cup to the hand
vacuum. To do so, position the locking
tab on the handheld unit within the
locking grove located on the bottom of
the dust cup. Press the other end of the
dust cup into position until you hear a
'click'.
- 13 -
The filter basket and