Connection Of The Devices - Bosch AEC-AMC2-UL1 Manual De Instalación

All manuals and user guides at all-guides.com
8 en

Connection of the Devices

Figure 4 Connection of the devices
NOTICE!
The following steps describe connecting the rechargeable
i
batteries in 24 V mode. For information on 12 V mode
connections, refer to Section 12 V Mode Variations, page 11.
1. Mount the AMC on the rail (item 2 in Figure 1) and left
aside the power supply.
2. Put the rechargeable batteries on the bottom of the
housing and secure them with the cable ties F - (Figure 2).
3. Stick the bracket J (Figure 2) on the back of the housing in
such a way that later on not used connectors of the cable
B can fixed with it.
4. Cable set A:
a.
b.
c.
5. Cable set B:
F.01U.097.252 | V 3.1 | 2008.12
Connect the 7-pin plug A1 to the AMC's power supply
connector (labeled: POWER).
Attach connectors A3 to the PS-interface DC and A2
to the interface labeled OK.
Connect the grounding cable A4 beneath the
grounding point 3.
AEC-AMC2-UL1 - Installation manual
Bosch Sicherheitssysteme GmbH