leaks, the connection between the extension hose and the product drain hose must
be securely inserted with a suitable flange to prevent any escaping water or leak.
Adjusting the supporting feet
WARNING!
•
To ensure that your appliance operates quietly and vibration-free, it must
be level and balanced (standing on its feet). Balance the machine by
adjusting the feet. Otherwise, the machine may move and cause a number
of problems, including vibrations.
•
Do not use any tools to unscrew the lock nuts. Otherwise, you may damage
them.
1.
Manually unscrew the lock nuts on the
2.
Adjust the feet until the machine is level and balanced.
3.
Tighten all nuts of the pipes by hand.
Electrical connections
Connect the machine to a grounded outlet protected by a 16 A fuse. Our company
cannot be held responsible for damage caused using the appliance without an earth
connection in accordance with local regulations.
•
The connection must comply with the regulations in force in your country.
•
The wiring of the electrical output circuit must be able to meet the requirements of
the appliance. The use of a ground fault circuit interrupter (GFCI) is recommended.
•
The power cable socket must be easily accessible after installation.
•
If the fuse or circuit breaker current in your home is less than 16 amps, have a qualified
electrician install a 16 amp fuse.
•
The voltage specified in the "Technical data" section must be equal to that of your
power supply network.
•
Do not connect the appliance using extension cords or power strips.
58
feet.