3
PRELIMINARY
OPERATIONS
3.1 LOADING THE PELLETS
The first operation to be performed before starting the
appliance is to fill the hopper with fuel (pellets).
The pellets are loaded into in the hopper using a scoop.
Do not empty the sack directly into the hopper so as to
avoid loading sawdust or other foreign bodies that may
affect proper stove operation and avoid spilling pellets
outside of the hopper.
Make sure the hopper lid is well closed
again after having loaded the pellets. A
safety switch (just for the models that are
equipped with it) makes sure that the pellet
tank lid has been closed properly (IS in fig.
8.1) and triggers a stove alarm in case the
pellet tank lid stays open for more than one
minute while the stove is still working.
3.2 POWER SUPPLY
Plug the stove into the mains power supply, move the power
switch at the rear of the stove to position "I" (Fig. 8.2). If
the connections are correct the stove will emit a series of
intermittent beeps, the display will come on.
If not using the appliance for an extended
period, the switch at the rear of the stove
should be moved to position (O).
3.3 INITIAL SETTINGS
Current date and time need to be set before using the stove.
3.3.1 Time and Date setting
To set the date:
a) Use the
buttons to go to the setup menu
b) Use the
button to select the password "7" and then press
c) Use the
button to scroll to and select submenu
d) The hour value will flash; set the value using the
e) The minutes value will flash; set the value using the
f) The day value will flash; set the value using the
g) The month value will flash; set the value using the
h) The year value will flash; set the value using the
i) The current weekday value will flash (Monday = 1... Sunday = 7); set the value using the
j) Press
to confirm the settings.
004778911 - 26/01/2022
ITALIANO
ENGLISH
and press
and press
[3]
buttons and press
buttons and press
DEUTSCH
;
to confirm;
to confirm;
buttons and press
;
buttons and press
;
;
buttons and press
;
;
FRANÇAIS
ESPAÑOL
IS
Fig. 8.1
Fig. 8.2
buttons;
21