Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Getting started with Analysis Vibration Sensor System
Tools and accessories
y Power drill
y Drill bit (4.8 mm / 3/16")
y Wall mount screws (6 x 50 mm / 15/64" x 1 31/32")
y Washers
y Rawlplugs (8 x 40 mm / 5/16" x 1 37/64")
y Cordless screwdriver
y Spirit level
Mounting procedure
1. Place the gateway against the wall and use a spirit (bubble) level to position the
gateway at the true horizontal.
Use the gateway mounting bracket as a template to mark the positions to drill the
four holes on the wall.
2. Drill the four holes in the wall as marked. Insert the rawlplugs into the drilled
holes, then place the gateway snugly against the wall.
3. Using a screwdriver, screw the wall mount screws into the rawlplugs. Tighten the
screws to secure the gateway to the wall.'
4. Connect the selected power supply source — PoE or 24 V DC — to the gateway.
36
Tabla de contenido
