Grouw 18224 Manual De Instrucciones página 68

Cradle (Fig. E)
Place the cradle (4) on the fl oor with the legs
on the inside of the front legs of the frame.
Place a cross brace (18) on each side on the
outside of the front legs of the frame.
Attach the parts using an M8×70 bolt, three
washers and a lock nut on each side.
Attach the cross braces on the inside of the
rear legs of the frame using an M8×40 bolt,
two washers and a lock nut on each side.
68
Inner blade guard (Fig. F)
Position the inner blade guard (5) over the
motor shaft and align it so that the holes in it
line up with the holes in the motor plate.
Attach the inner blade guard using three
M8×20 bolts, washers and lock nuts at the
top and an M8×45 bolt, a washer and a lock
nut at the bottom.