CrissAir CCB 04 G5 Manual De Instrucoes página 16

Instructions for use
Installation
All the operations concerned with
EN
the installation (electrical and gas
connections, adaptation to type of gas,
necessary adjustments, etc.) must be
terms with the standards in force.
the part reserved for the installation
technician.
Use
Gas burners (Fig. 1-3).
The ignition of the gas burner is carried
part holes of the burner, pressing and
rotating the corresponding knob in an
mum position has coincided with the
marker. When the gas burner has been
need. The minimum position is found at
the end of the anti- clockwise rotation
direction.
In models with automatic ignition,
operate the knob as described above,
pressing simultaneously, the cor-
with automatic/ simultaneous (with
proceed as described above using
the corresponding knob. The electric
spark between the ignition plug and
the burner provides the ignition of the
burner itself. After ignition, immediately
release the push-button and adjust the
system, the burner is ignited as in
the various cases described above,
keeping the knob fully pressed on the
3/5 seconds. After releasing the knob,
make sure the burner is actually lit.
N.B. - we recommend the use of pots
and pans with a diameter matching that
from escaping from the bottom part and
surrounding the pot
• do not leave any empty pots or pans
• do not use any tools for grill-cooking
on Crystal hobs.
good norm to close the main gas pipe
tap and/ or cylinder.
Models with Dual Wok burner
Some models have a Dual Wok
lit by pressing the knob and turning it