Oreck AIR RESPONSE Manual Del Propietário página 9

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

CAUTION! TO REDUCE THE RISK OF INJURY FROM MOVING PARTS - UNPLUG BEFORE CLEANING AND SERVICING. IMPORTANT! THE FILTERS ARE NOT WASHABLE.
Replacing the 3-Stage Filter
1
Once Filter Replacement
indicator light illuminates,
remove the cover filter.
Replace 3-Stage filter according to indicator light.
3
Slide replacement filter
into the unit.
2
Slide the filter lock to
the left. (Unlock position).
4
Lock the filter into place by
sliding the filter lock the right.
Refit the filter cover.
3
Carefully pull the
used filter out.
Remove any plastic coverings
from new filter(s) before installing.
5
After cover is refit, hold down
Filter Replacement indicator
button for 5 seconds to reset the
air purifiers indicator light.
Dust Sensor is located
on the back of the unit.
Clean dust sensor every time a
filter is replaced by gently wiping
clean with a cotton swab. This will
help ensure the air purifier
continues to operate at maximum
performance.
8
Tabla de contenido
loading

Tabla de contenido