Airwheel H3TS+ Manual Del Usuario página 6

User Instructions:
1.Take out the accessory box at the
rear of the wheelchair
Open the wheelchair carton, take out the wheelchair and
at the rear of the wheelchair (see Picture1-1) and remove the
cardboard near the motor lock. Turn the motor lock to drive
mode (see Picture1-2). Contents in the paper box: a Charger,
controller, user manual, plastic tie and assembling tools etc.
2.Install the joystick
The joystick could be installed on the left or right armrest freely, accoridng to user's habit
① Fix the joystick groove with screw and tighten the screw (Figure 2-1)
② Insert the joystick into the groove and tighten the screw. (Figure 2-2)
The joystick groove
2-1
The joystick
assembly
2-2
- 3 -
clutch
handle
1-1
The joystick wiring
Screw
1-2
2-3