Airwheel H3TS+ Manual Del Usuario página 10

3.Battery charging instructions
Please connect the charger to the wheelchair before connecting
it to the AC power while charging. Please align the notch on
the charger (See Picture 3-1) with the protruding part of the
charging port (See Picture 3-2), insert and tighten the fixing cap
for connection. Please loosen the fixing cap before removing the
charger from the wheelchair.
4. Left and Right Joystick Exchange
Disconnect the joystick cable (Figure 4-1) and loosen the screw to remove the joystick (Figure 4-2). Remove notch of
one side of the joystick (Figure 4-3), turn it 180 degrees to the other armrest position, tighten the screw to secure the
joystick (Figure 4-4), then insert the joystick into the notch. Attach the screw (Figure 4-5), reconnect the joystick wiring,
and finally attach the joystick cable with the cable ties (Figure 4-6).
4-1
The joystick
assembly
The joystick
groove
Screw
4-2
notch
4-3 4-4
- 7 -
protruding
part
3-1
4-5
3-2
4-6