Technical Data; Warranty; Ec Declaration Of Conformity - Powerworks GDC60 Manual Del Operario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
PROBLEM
POSSIBLE
CAUSE
The motor buz-
The battery pack
zes, but you can
is out of power.
not start the ma-
The system has
chine.
remaining pres-
sure.
You do not use
the machine for
a long time.
There is remain-
ing friction in
components.
You can hear a
hum.
There is no wa-
The water supply
ter.
is off.
The garden hose
is blocked.
8

TECHNICAL DATA

Rated Voltage
Rated Pressure
Permissible Pressure
Power Rating
Rated Water Flow
Maximum Water Flow
Maximum Water Inlet
Pressure
Maximum Water Inlet
Temperature
Measured sound pressure
level
English
SOLUTION
Charge the bat-
tery pack.
1. Stop the ma-
chine.
2. Pull the gun
trigger on
spray wand
to release
pressure
3. Start the ma-
chine.
Speak to a per-
son of an ap-
proved service
center.
1. Disconnect
the water
supply.
2. Turn the ma-
chine on for
2 or 3 sec-
onds.
3. Repeat the
above step
for several
times.
Turn the water
supply on.
Make sure that
the garden hose
is free from
blockage.
60 V
5.5 MPa
7 MPa
750 W
3.7 l/min
5 l/min
0.7 MPa
40 °C
L
= 78.9 dB(A), K
= 3
pA
pA
dB(A)
Measured sound power
level
Guaranteed sound power
level
Vibration
Battery pack model
Charger model
9

WARRANTY

(The full warranty terms and conditions can be found on
POWERWORKS webpage)
The POWERWORKS warranty is 3 years on the
product, and 2 years on batteries (consumer/private
usage) from the date of purchase. This warranty covers
manufacturing faults. A faulty product under warranty
might be either repaired or replaced. A unit that has
been misused or used in other ways then described in
the owner's manual might be rejected for warranty.
Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not
affected by any additional warranty offered by a dealer
or retailer.
A faulty product must be returned to the point of
purchase in order to claim for warranty, together with
the proof of purchase (receipt).
10
EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name:
Changzhou Globe Co., Ltd.
Address:
No. 65 (3-4) Xinggang Rd., Zhonglou
Zone, Changzhou, Jiangsu 213101 China.
Name and address of the person authorised to compile
the technical file:
Name:
Peter Söderström
Propellergatan 1, 211 15 Malmö, Swe-
Address:
den
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
9
L
= 92 dB(A)
wA
L
= 95 dB(A)
wA.d
2
2
< 2.5 m/s
, K = 1.5 m/s
2900413/ 2900513
2900313
Double-insulated con-
struction.
Pressure washer
GDC60
See product rating label
See product rating label
EN
Tabla de contenido
loading

Este manual también es adecuado para:

Pwc301

Tabla de contenido