Tripp-Lite SRRAILDPTH1U Guia De Instalacion página 2

Installation
SRRAILDPTH1U shown.
To INCREASE the Depth of the
Rack
Use for rack-mounting LONGER
components.
1
Position the brackets so the rack-mounting holes are
on the outside of the rack's front vertical rails.
2
For 1U brackets, use two of the supplied M6 screws,
washers and cage nuts per bracket to secure the top
and bottom rack-mounting holes to the rails. For 2U
brackets, secure the top, bottom and two center holes.
3
Secure your equipment's mounting flanges to the
brackets' equipment-mounting holes.
SRRAILDPTH1U shown.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Photos and illustrations may differ slightly from actual products.
1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support
Rack-Mounting Holes
Equipment-Mounting Holes
To DECREASE the Depth of
the Rack
Use for rack-mounting SHORTER
components.
1
Position the brackets so the rack-mounting holes are
on the inside of the rack's front vertical rails.
2
For 1U brackets, use two of the supplied M6 screws,
washers and cage nuts per bracket to secure the top
and bottom rack-mounting holes to the rails. For 2U
brackets, secure the top, bottom and two center holes.
3
Secure your equipment's mounting flanges to the
brackets' equipment-mounting holes.
SRRAILDPTH1U shown.
2
21-04-297 93-3E42_RevA