Assembling The Power Adapter; Troubleshooting - Miracle-Ear LINK Remote Mic AV Manual Del Usuario

Assembling the Power Adapter

Assembling the Power Adapter
The Miracle-EarLINK
a variety of plug configurations for use in different
countries. If the power adapter requires assembly:
1. Select the appropriate plug
configuration used in your
country.
2. Slide the plug onto the
power adapter until it snaps
into place.
3. To remove the plug, press
the tab and slide the plug
away from the cable.
16
Remote Mic AV may include
™
1
2
3

Troubleshooting

SYMPTOM POSSIBLE CAUSES
One (or both) Hearing aids may
hearing aids be on the edge of
unexpectedly wireless range.
drops out
Battery level in
of audio
hearing aid can no
streaming.
longer support audio
streaming.
Large object, such
as furniture or a wall,
may be degrading
signal.
Wireless
connection with
Miracle-EarLINK
Remote Mic AV was
lost.
Streamed Low battery level in
audio quality Miracle-EarLINK
is distorted. Remote Mic AV.
Audio stream Volume
is too loud or streamed from
too soft. Miracle-EarLINK
Remote Mic AV
to hearing aid not
optimal.
Difficult to Miracle-EarLINK
hear speaker Remote Mic AV
in noisy may be too far from
environments. speaker.
Miracle-EarLINK
Remote Mic AV
may be covered by
clothing or poorly
positioned.
Troubleshooting
SOLUTIONS
Move closer to
Miracle-EarLINK Remote
™
Mic AV.
• Replace hearing aid battery
with new one.
• Recharge your hearing aid,
if applicable.
For best performance,
your hearing aids should
be within line-of-sight of
Miracle-EarLINK Remote
™
Mic AV.
To restart the audio stream,
follow steps in the Start/Stop
™ Audio Streaming section.
Recharge Miracle-EarLINK
Remote Mic AV.
™
Adjust the stream volume
via Miracle-Ear app,
®
Miracle-EarLINK Remote
™ ™
AV, or hearing aid user
controls.
Move Miracle-EarLINK
™ ™
Remote Mic AV closer to
speaker's mouth.
Provide clear access from
™
Miracle-EarLINK Remote
™
Mic AV to speaker's voice.
™
17