Rules Of Use; Preparation For Operation - hillvert HT-WEDGE-50A Manual De Instrucciones

n) When operating the unit, do not look into the light emitted by the unit without
appropriate protective glasses.
o) Install the unit in a location protected from moisture, such as condensation
water.
p) The unit is not intended to illuminate living quarters. Use only as an additional
source of light to stimulate plant growth.
q) The use of sprinklers or other water systems is not permitted while using the
unit.
CAUTION! Although the product has been designed to be safe, with
adequate safeguards, and despite the additional safety features
provided to the user, there is still a slight risk of accident or injury when
handling the unit. You are advised to use caution and common sense
when using this product.

3. Rules of use

The product is designed to illuminate the plants and thus stimulates their growth.
The user is responsible for any damage resulting from misuse.
3.1.

Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 95%. Place the unit in a way that ensures good air circulation. Maintain a
minimum clearance of 10 cm from any wall of the unit. Keep the unit away from any
hot surfaces. Always keep the device out of reach of children and persons with
reduced mental, sensory or intellectual functions. Place the unit in such a way that
the mains plug can be reached at any time. Ensure that the power supply to the unit
corresponds to that specified on the identification plate!
ASSEMBLY OF THE UNIT
1. Securely fasten the lamp to the outer component, e.g. using clamps, etc.
mounting elements.