Functions - Berner 177903 Manual De Instrucciones

Functions

(Page 2)
1. ON/OFF
2. Zero key
3. Hold-button
4. Battery-cover
5. Data output
6. Fixing screw
7. Metric / Inch conversion
8. Display
Battery replacement:
Open battery cover to the right side. Replace battery, with anode outside.
Now close the battery cover very carefully.
Notes:
Please prepare with measuring very carefully. Keep surfaces clean.
The caliper should be regularly cleaned with cotton-cloth.
Do not use petrol. Do not expose the caliper direct to the sun light,
ultraviolet rays or extreme temperatures.
Prevent it from any shock and do not immerse the caliper in any liquid.
Electric etching or engraving by high voltage can destroy the electronic
chip, no warranty will be given!
Never dismantle the caliper housing.
The battery should be taken out, if no use for a long time.
Do not give used batteries in refuse.
Please give it to a special collecting depot.
Electr. digital caliper
Operation manual
: Specifications:
Measuring range: 0 – 60mm
Resolution: 0.01 mm, 0.0005"
max. Accuracy: ± 0.04 mm
max. operational speed: ± 1.5 m/sec.
Repeating accuracy: ± 0.01 mm
Power supply: battery 1.55 V, Typ SR44)
Storage temperature: 5°C bis 40°C
Humidity influence: 0 - 80%
EN
6