Sterilising, Heating Or Defrosting - ALFA babycare bbrobot Manual De Instrucciones

• Plug in the cord into the wall power socket and turn on the On/Off switch. If the assembly has been
properly locked, the 3 pictograms (steam, blend, vacuum sealing) will light up in green.
Otherwise, for safety reasons, the robot will not work until it has been firmly fixed into place once again).
• So as to function, the symbol BLADES must be pressed down throughout the blending process.
The blades indicator will remain illuminated in blue throughout the entire process). The robot will automa-
tically stop after 10 sec. (1 blending cycle) and the BLADES indicator, together with the other indicators
(Steam and Vacuum Packaging) will once again light up in green, indicating that the robot can be reused.
Press again if you want to continue blending (max. 2 consecutive cycles), after 2 cycles, the
LED display will show a red light. After 2 cycles the motor will stop for 1 min after which it can
be started again. If the blades button is pressed again when in operation, the process will be
cancelled automatically.
• Open the lid by using the handle, then remove the holding grille and pour the contents into
another receptacle for consuming or storing (with the help of a wooden or plastic spatula so as
not to damage the blades).
It is recommended to always unplug the appliance before cleaning it or when it is not
being used.

Sterilising, heating or defrosting

Specific information to read before using the robot as
a sterilising/heating/defrosting appliance:
• Do not use the
the necessary amount of water in the pail.
• The blades must be fixed in place during
sterilisation/heating/defrosting.
• The basket must be used for heating, defrosting or sterilising,
otherwise, it will damage the robot.
90
Pantone 1805
Pantone 423
to heat or sterilise without