Removing The Cheek Pads; Installing The Cheek Pads - Sena Outstar S Guia Del Usuario

2 WEARIng THE HELMET

2.5 Removing the Cheek Pads

1. Unsnap the three fasteners of the cheek pad from the helmet.
2. Remove the cheek pad by pulling it upward.
3. Repeat the process on the opposite side.

2.6 Installing the Cheek Pads

1. Pass the chinstrap through the hole of the cheek pad and insert the
cheek pad's plastic plate into the space between the shell and EPS.
2. Snap the three fasteners of the cheek pad into place.
3. Repeat the process on the opposite side.
OUTSTAR S Bluetooth Helmet | 11
®