san ignacio 50292 Manual De Instrucciones página 9

PARTS NAME (SEE ILLUSTRATION):
1. Housing
2. Eject button
3. Turbo button
4. Speed control knob
5. Unlock button
6. Dough hooks
7. Beaters
8. Bowl
9. Support arm
10. Mixer release button
BEATER AND DOUGH HOOKS
1. Fit the mixer on to the stand by sliding the front of the mixer onto the tab at the
front of the stand, push down gently on the top of the mixer to clip into the locking
mechanism.
2. Push the tilt control button on the back of the stand and the mixer head back.
3. If using as a hand mixer, remove the mixer head from the stand by pressing the
mixer release button.
4. Check that the speed switch is in the "0"(OFF) position, then holding each beater/
dough hook by the stem, gently push into the sockets on the underside of unit, if
necessary, rotate the beaters/dough hooks by hand until both lock firmly into place,
looking at the underside of the unit, note that the beater/dough hook with the gear
mechanism goes in the left-hand position. Put the bowl in place.
5. Lower the mixer back into its horizontal position by pushing the tilt control button.
6. When the beaters are firmly located, plug the unit into a power outlet.
MIXING
1. Once the mixture is in the bowl, select the speed required by moving the speed
selector with your thumb, the speed maybe changed at anytime, even while the
mixer is operating.
2. The driven bowl will rotate automatically for hands-free operation.
3. To ensure all ingredients are thoroughly mixed use a spatula to scrape the sides of
the mixing bowl from time to time.
4. To prevent spattering keep the beaters in the mixture and always switch the mixer
off before lifting the beaters from the mixture.